Temptooth Do It Yourself Tooth Replacement Product

Ok, my husbands tooth fell out a week ago.He's an acupuncturist and sees patients daily, and since it just HAD to be one of the front teeth, getting a tooth replacement was needed now!As we know, it costs around $1000 to get an implant or bridge done and we needed some time to get that together.I was actually Googling dental insurance plans when I came upon TempTooth.Emailed the link to the hubs; we discussed and eventually decided it was the way to go until we could get his tooth replaced next month.

Here's the truth about TempTooth:can you make a tooth in about 15 minutes?Absolutely!Will it LOOK like the actual tooth that needs replacement?Only if you have realistic expectations and want to put a little more effort into the process than the instructions say.

The pluses about TempTooth is that you CAN have a temporary tooth until you able to afford the implant/bridge.For a medium-sized front tooth, it took about 12 of the beads.You want to start with less beads and possible add more if necessary because we found that once it hardens under the cold water process, it expands and becomes a little bigger and you can't fit it in.Start with 10-12 beads and add some if necessary.It's easy, just warm them along with the tooth you are forming; remold it again

Once they are transparent, they are very easy to shape into a tooth.If it's still not right, stick it back into the very warm water and wait till the edges become transparent and work on the shape a bit more.You are looking for a good fit and a tooth that looks as close as possible to the one that you lost.

Here comes the "work" part.You must be willing to follow through to have as close to a realistic tooth as possible.Once you have the shape of the tooth, it's gonna look like a really bright light in your mouth because it's so white, LOL!Don't worry, you'll need a cup of black tea to fix this.You will have to submerge the "tooth" into the black tea (took us about 12 hours overnight) to "stain" it to the color of your regular teeth.Some will need more time; some less.Depends on how often you have your teeth cleaned!

Now... to have the new tooth look like the lost tooth takes a little reshaping.You want the tooth to have the same "length" as the original.Plus, the width may be a bit wide and/or bulky looking as well.Clipping with a nail file is a little difficult since the tooth is thick from molding it and by now, it's a hard plastic.To get around this, I used a hand rotary drill with a round, fine sandpaper attachment.DON'T let this freak you out because it's actually a lot easier than it sounds.

Secure the tooth in some small needle nose pliers so it doesn't slip out of your hand and go flying across the room once you take the drill to it, LOL!Start with short burst with the drill until you get the hang of sanding the edges of the front of the tooth while the shortening the length to match it's "sister" tooth in your mouth.You can also sand off some of the thick excess on the bottom part of the back of the tooth; just be sure you don't mess with the sides of the back that need to adhere to the 2 teeth beside it in your mouth.Trust me, this is really easy.The more I worked with it, the more I was getting into it! :D

Some of the plastic may fray and not completely sand off.Just grab the nail clippers and clip it off and rinse.All in all, it took me no longer than 30 minutes to sand the edges for form a more realistic-looking tooth.I can now add "Tooth Maker" to my list of wifely/motherly duties, LOL!!!

One thing that would really be a good idea to try is this:if you still have the original tooth that fell out, heat the TempTooth and then mold it around the original tooth.You are going to create a mold to work with.Pull the original tooth out and run the mold under cold water to harden it completely.Make another batch of the TempTooth and gently push it into your mold to form the tooth you'll be working with (but not when it's real hot or it will melt the mold).Run the tip (the root part) only of your new tooth under cold water to make it hard enough to grip when you pull the tooth out of the mold.You may have to try this method a few times to get the hang of it, but I think it just might work and I wish I had thought of it last night instead of when I finished the tooth this morning!It would be interesting to know if this option works.

Bottom line:We are both really, really please with the outcome of this product.After a little staining, a little sanding, it looks exactly like the one he lost.Do I recommend TempTooth as a temporary replacement tooth oh HECK yeah in a heartbeat!!My husband and I are THE biggest skeptics when something like this comes along, but at this point, we had no choice but to try it, and if it didn't work, we didn't feel like the $30 we shelled out would be too huge of a loss.

Is it as quick as 15 minutes?No, you need to put a little effort into it if you want it to look as natural as possible.It was actually kind of fun and my 4 kids got a hoot out of watching us and offering suggestions.

Please don't think this is a paid "endorsement" of the product either.I wish!This was a purchase out of desperation, hoping it would work, and really pleased that it did.I sell a lot on Amazon, so if you need to contact me to ask any questions, I think you can by clicking on my name above.I'll be more than happy to help you out with this.I'm also following customer comments in case I can help.

My deepest thanks to TempTooth!I really hope you have a lot of success with this because it was a lifesaver to my husband.My only suggestion would be to experiment with tints that could be included with the product to make color-matching easier.

After losing my dental partial I've had for several years, I was devastated to look in the mirror at this hole in my mouth! While at the dentist getting fit for my new partial I asked is there any means of filling in this hole until my partial comes in? Of course they said no, there is nothing available but to try wax.Well after reading the reviews about temptooth and knowing I had nothing to lose, I ordered it.I must admit I was skeptical and scared to try but when that first tooth attempt was a success I was overjoyed. It snapped right in and stayed secure, I couldn't believe it! That's when the next tooth was fun and got creative on shaping it! Yesterday I picked up my $590 partial from the dentist that doesn't fit as well as the temptooth. I'm so glad I found this product and will still use it even thou I have my dental partial!!!!

Buy Temptooth Do It Yourself Tooth Replacement Product Now

there is nothing more depressing than losing a tooth.this product was the answer to my prayers.there is nothing like it anywhere as far as i could find -and i searched and searched.the guy who invented this is a genius -it should make him a millionaire -the big dark hole in my smile is gone -if you are missing a tooth, don't think twice about trying this product. i am not a "handy" type of guy, but it was very easy to use.and it's so inexpensive!i can't tell you what a relief it is to be able to open my mouth and not feel embarrassed.i can't thank the guy who invented this enough.

Read Best Reviews of Temptooth Do It Yourself Tooth Replacement Product Here

I was very interested in this product. I had an acrylic partial that broke as I was eating an apple, and have not been able to get it replaced yet. I used 10 beads which were enough for me to make 2 small upper teeth. There is a fine line between too little and too much. I steeped/melted my beads in tea to get a natural tooth color, which worked perfectly.

I watched the instruction video here. It took a bit to get the hang of shaping it, and I just kept reimmersing the beads to soften and I just did that over and over until the look was right. I also too extra time with the back "wings" and made sure the back was molded well across the two adjacent teeth. I know that this is very important for a secure fit. I also let it dry in my mouth mostly before I took it out to run the cold water. This worked for me. I got a very natural, tight fitting looking tooth for so little money and effort, it really surprised me. I have eaten and drank with this in, it stayed tight and I just did not put any chewing force on the tooth and it was just fine. Honestly the fit on this is better than my partial I had. I found a company that manufactures this same exact material (thermoplastic) and I actually ordered from them. , Under the buy now tab, They have a five dollar "sample" bag which is 1oz, and its HUGE, compared to the others you see online. I did not count the beads but there is enough for 100+ teeth. It is the exact same material and does the same thing. I do think the price on this is very steep for what you get, and with a little research I was able to get the same results, with a LOT more product, for a LOT less money.

Want Temptooth Do It Yourself Tooth Replacement Product Discount?

This is one of those greatest inventions that you wonder why

we didn't have it SOONER!

I have used it, and so has my husband.

We lost our insurance...including dental, when my husband

had to take an early retirement.

I had a missing tooth..an upper one ...count from front tooth

on right side and go back 3 teeth. BINGO..that's the missing one!

Okay, so the first few tries, I messed up, but that's okay, because

I just put it back into the hot water, it remelted....and voila!

I got it right!!!

My husband was much better at it, as he did it right the first try.

His missing tooth was a lower, count back three teeth.

We both look WAY BETTER!

I was considering something a dentist told me that was called a 'flipper' ???

But this my friend to ME is way better. It is something we can afford, and if

I eventually lose this temptooth, or whatever.... I have plenty of product to

make more. So far, this tooth has lasted me 3 weeks...my husband still has his

original one from over a month ago. It doesn't show any signs of deterioration.

So YES, we LOVE IT! Thank you for inventing this product! I hope the best for you!

And if you are reading this review, considering buying it....I'm telling you, (and

I don't have any stock in the company...LOL), it WORKS! BUY IT!